Meter test kit includes: NIST calibrated with certificate, set of five pounds, electrodes and Leads. Use with the meter to measure resistance point-to-point (RTT) and resistance to ground (RTG). Automatic test range voltage selection per compliance verification ESD TR53. Starts tests at 10 volts and automatically switches to 100 volts if the measurement is over 10⁵ ohms.

• Use to conduct required compliance verification periodic checks
• Automatic test range voltage selection per compliance verification ESD TR53
• Starts tests at 10 volts and automatically switches to 100 volts if the measurement is over 10E5 ohms
• Portable operation with 9 volt battery
• No charging or sourcing of special batteries needed
• LED illuminates when battery power is low prevents operator from making bad measurements
• Use with the meter to measure resistance point-to-point (RTT) and resistance to ground (RTG)
• NIST calibrated with certificate
• Calibrated with accepted procedures and standard traceable to the National Institute of Standard Technology